Richmond Hill (Oak Ridges): a clean, healthy attic that just needed depth

1The Problem

Seven inches of clean, dry insulation is good news — it means nothing has to come out. It’s still barely a third of the R-60 standard, and in a neighbourhood full of 2000s builds like Oak Ridges, that gap shows up as second floors that drift from the thermostat and bills that creep every year.

2What the Inspection Found

The inspection confirmed what the first photos suggested: no mold, no pests, no moisture issues — just settled depth and a hatch that needed sealing. When that’s the finding, we say so. Removal would have been an upsell, not a service.

3How We Fixed It

The right-sized scope:

• Air-sealed the penetrations and the hatch perimeter
• Protected the soffit airflow with baffles
• Blew fresh fiberglass over the existing healthy material up to R-60

4The Result

A few hours on site, no drama, and an attic that finally matches the house. This is what most Richmond Hill quotes should look like — and if a contractor pitches removal on an attic like this, ask for the photos. 10-year warranty.

5The Short Version

Confirmed Attics & Insulation publishes its mold jobs and pest cleanups because homeowners should see the worst cases — but most attics are like this Oak Ridges home in Richmond Hill: healthy, dry, and simply half as deep as they should be. The 880 sq ft attic measured about 7 inches of clean material, so the honest scope was a top-up, not a removal. A few hours on site took it to R-60 with no drama and no upsell. That is what most Richmond Hill quotes should look like — and if a contractor pitches removal on a healthy attic like this one, ask to see the photos that justify it. Straightforward work, priced for what the attic actually needed and nothing more — the kind of quote an inspection-first process produces. Completed July 2026; 10-year workmanship warranty.